Choose Plants > Device > Inspection from the main menu. In the device list, click in the Operation column, or select one or more devices to be inspected and click Start Inspection to create an inspection task.
[pdf] The LumiSolarMobile system is a multi-purpose electroluminescence inspection system for solar cells and solar modules. Micro-cracks, cell failures, inhomogeneities, and other defects which are extremely difficult to detect visually can be detected clearly using LumiSolarMobile.
[pdf] This can include standard area scan cameras for inspecting battery cells and battery packs, line scan cameras and contact image sensors to image battery foils as they get coated, pressed, slittered and assembled into cells, 3D scanning of cans, cells and packs to ensure a full view of the battery component is captured during testing, X-ray to inspect the inside of a battery cell after it has been sealed, and thermal imaging during the testing of batteries to monitor thermal runaways.
[pdf] Completeness of the documentation and its correspondence with the REG system on-site, as per SEC’s inspection checklist. Inspect the presence of Interface Protection and required switches. Witness Compliance test to be performed if necessary, during cold commissioning.
[pdf] We recommend conducting a scheduled technical inspection of solar power plants twice a year. Special tools allow us to easily inspect your solar panels and pinpoint a large number of problems.
[pdf] This procedure includes system nameplate rating (kW), solar irradiance measurement (W/m2) and module cell temperature (C). Procedure is best conducted during consistent weather conditions, where no array shading is present, and solar irradiance is not less than 400 W/m2.
[pdf] 
